Allmand Brothers 15-20 V - MLV15-20 HYDRAULIC - Manual (Page 2)

2 2
INSPECTION CHECK LIST
FOR PREPARING THE MAXI LITE FOR DELIVERY OR RENTAL
The MAXI LITE V-SERIES requires service as well as proper operation in order to provide
the performance and safety it has been designed for. Never deliver or put a machine into
service with known defects or missing instructions or decals. Always instruct the customer
in the proper operation and safety procedures as described in the operator’s manual. Al-
ways provide the manual with the equipment for proper and safe operation.
CHECK LIST:
 Visually inspect the equipment to ensure that all instructions and decals are in place and
legible.
 Inspect the tower latch and knob assembly which locks the tower in the vertical position
for proper operation
 Check the hitch assembly and safety tow chains
 Check the outriggers and jacks to make sure they operate properly
 Inspect the light assemblies for damage and test for proper operation
 Inspect the electrical wiring for signs of damage
 Check the ground rod cable and the ground lug. Make sure they are clean, undam-
aged, and functional.
 Inspect the tires to ensure good condition and proper inflation
 Check oil, fuel, coolant levels, and hydraulic fluid levels.
 Check to make sure the operator’s manual is with the equipment.
 Inspect the machine physically for damage and repair if necessary.
 Inspect the light bar and latch in transport position.
NOTE: See appropriate section of manual for scheduled maintenance intervals.
After completing the inspection check list, operate the tower through a complete op-
eration cycle, following the operating instructions in the operator’s manual.
WARNING
NEVER ALLOW ANYONE TO OPERATE THE EQUIPMENT WITHOUT
PROPER TRAINING!
ALWAYS READ THE INSTRUCTIONS FIRST!