Alinco DJ-A446 - Manual (Page 21)

Professional
FM Transceiver 7
INSTALLATION & CONNECTION
UN LO CK
Installing / Removing the Belt Clip
Installing the Belt Clip:
1. Put the belt clip on the back of the unit, and the screw clockwise
until it stops.
2. Confirm that the belt clip is securely attached.
* Tighten up the screw occasionally.
Removing the Belt Clip:
Turn the screw counter-clockwise to remove the belt clip.
Caution: Use the screws of specified size only. Others may cause
damage to the product. (screws size PM Φ 2.5mm x 3mm)
Open the jack cover and insert the accessory plug
into the jack,as shown.
When the accessory is not used, please be sure to
close the cover securely.
Accessories