Alinco DJ-A11E - Manual (Page 41)

Professional
FM Transceiver 24
PRESET OPERATIONS
Signaling Relations Setup
Channel Scan Skip
Users can choose whether to set current channel as Scan Skip by programming software.
Transceiver will skip current channel during scan when it is set as Scan Skip.
TX OFF
Once this function is enabled, [PTT] key becomes invalid and it works only as a receiver.
Battery Save Setup
This function prevents useless battery consumption by switching the power ON/OFF at a fixed ratio
if there is no key operation or receiving signal for a continuous period of 5 seconds or more. Higher
OFF time (1:4 setting) saves more amount of battery but may cause slight delay on receiving. The
Battery Save function is temporarily suspended when a key is operated or a signal is received.
Users can set relations between CTCSS/DCS signal and DTMF signal by programming software.
AND: Only when a matching CTCSS/DCS signal and a DTMF signal are received, can calling of other
party be heard.
OR: As long as a matching CTCSS/DCS signal or a DTMF signal is received, calling of the other party
can be heard.