Servicing the inlet valve – AIRLESSCO GS800 User Manual
Page 12
Maintenance
12
3A1186F
Servicing the Inlet Valve
1. Un-thread and remove suction nut from fluid pump
body.
2. Remove suction seat, O-ring, suction ball and suc-
tion retainer.
3. Clean all parts and inspect them for wear or dam-
age, replacing parts as needed.
4. Clean inside of the fluid pump body.
5. Reassemble lower suction valve assembly by plac-
ing the suction seat, O-ring, suction ball and suction
ball guide in the suction nut and screw onto fluid
pump body.
ti16055a
8
9
10
11
12
13