AIRLESSCO SL1100 - Manual (Page 16)

Maintenance
16 3A1184G
17. Thread the packing nut (2) into the top of the fluid
body (3) and tighten hand tight.
18. Take the suction retainer (10) and replace the black
O-ring (15) with a new one from the packing kit.
Replace the suction ball (11) with a new one from
the kit into the suction retainer (10). Place the suc-
tion seat (13) into the flat side of the ball guide (6),
over the suction ball (11). Now place the white
O-ring (14) into the groove around the suction seat
(13).
19. Take the completed suction valve assembly and
place it into the bottom of the fluid body (3), with the
rounded side fitting inside.
20. Take the suction seat support (12) and place the flat
side down on to the suction valve assembly (threads
will be facing upwards).
21. Thread the suction nut, over the suction seat sup-
port (12).
22. Tighten the packing nut (2) (utilizing the packing nut
adjustment tool) clockwise one full turn.
3
18
19 17 19 17 19
20
19 17 19 17 19
18
1
6
7
5
8
9
4
21 21 21
22
24
23
24
23
24
25
26
27
28
2
10
11
13
12
16
14
15
ti16002a