Euro-Pro EP965 - Manual (Page 16)

This steam cleaner can be converted to a high quality steam ironing system.
Unplug the steam cleaner from the wall outlet.
Disconnect the Flexible Steam Hose from the steam cleaner.
Lift the plastic cover of the connector port (8).
Insert the iron hose with the connection plug (D) to the connector port (8) on the unit. Lower the
plastic cover. Make sure that the pin in the cover fits into the hole of the plug.
Connect unit to the wall outlet.
Set the temperature regulator (G) on the iron to the desired temperature in the steam range.
Allow the iron to heat up until the Temperature Light (E) turns off, indicating it has reached the set
temperature.
You can start ironing now.
Place the iron rest (H) on the ironing table. Always put the iron on the iron rest when not is use.
Place the iron hose on the Steam Hose Holder (9), as shown on the front page of this instruction book.
A - Steam Button
B - Continuous Steam Lock Button
C - Handle
D - Steam Hose with Connection Plug
E - Temperature Light
F - Iron Soleplate
G - Temperature Regulator
H - Iron Rest
Ironing With Steam
Hole
ATTACHING YOUR STEAM IRON
TO THE STEAM CLEANER
USING AS A STEAM IRON
For ironing with steam, make sure that the temperature is set within the area designated for use
with steam, i.e. between Wool and Linen on your Temperature Regulator (G). When the chosen
temperature is attained, the Temperature Light (E) will go “Off” and your iron is ready to be used. ( If
you need a steady supply of steam, simply press the Continuous Steam Button (B) down and then
push it backwards to lock the Steam Button (A) in. To unlock, press the Continuous Steam Button
(B) down again and push it forwards.)
• Damp Steam - You can iron any fabric with damp steam as long as you turn the Temperature
Regulator (G) to “Wool” setting .
• Dry Steam - With the iron temperature at the “Linen” setting, ironing will be more efficient.
• For delicate fabrics, press the Steam Button (A) before placing the iron on the fabric.
• The “Silk/Nylon” setting can not be used for steam ironing. This setting is designed only for dry
ironing.
Dry Ironing
For a ironing without steam:
• Set the Temperature Regulator (G) to the position which corresponds to the fabric you wish to iron.
• Turn the ON/OFF Switch (2) to “ON” position. The Temperature Light (E) on the iron will light up.
• As soon as the Temperature Light (E) goes off, the iron has reached the desired temperature.
NOTE : Do NOT press the Steam Button (A) when you are ironing without steam.
15