Configuring video streaming settings, Video streaming settings view modes – ACTi Camera_Demo_Tool V1.5.04.13 User Manual

Page 8

Camera Demo Tool v1.5.04.13

Configuring Video Streaming Settings

For specific demo purpose, for example, to use higher bit rate for high quality video stream, you may

need to modify the preset bit rate value.

PC Configuration “Customization” allows every video

streaming property to be changed. On Settings page, you can select any of the following view modes

and configure its video streaming settings: Single View, Multi VGA, ePTZ, DNR, WDR, Edge

Enhancement and Snapshot, then the settings will take effect in Live View.

1. Select a view mode.

2. Fill in the connection settings and c

lick “Connect” to get the video stream.

3. Modify its video streaming properties.

Click “Save” to save current settings.

Fig. 4 Video Streaming Settings

Note:

By choosing

“MJPEG” as encoder type, Bit Rate field is hidden and Quality field will appear for

you to modify.

Fig. 5 Video Streaming Settings-Encoder Type

Note:

The View Mode settings will only take effect in Live View when the camera model supports the

corresponding functions, and vice versa.

Video Streaming Settings

View Modes