ACTi Camera - Manual (Page 3)

On Network without DHCP Server (Default IP)
1. If necessary, configure the IP settings of your PC to match with the
network segment of the Camera.
2. Open a web browser and type 192.168.0.100 on the URL address bar.
The Web Configurator appears. Login to access the Camera.
Camera Defaults
IP Address:
192.168.0. 100
Subnet:
255.255.255. 0
PC can be assigned with
IP Address (different from Camera)
Example:
192.168.0. 99
Subnet (same with Camera):
255.255.255. 0
How to configure the PC IP address?
Click Start > Control Panel > Network and Sharing Center >
Change adapter settings. Then follow the steps below:
1
2
3
4
Note: For full functionality, it is recommended to use Microsoft Internet Explorer ® .
When using non-IE browsers, free 3 rd party software plug-ins may be required.
Refer to the device Firmware Manual for more information.