Step 3: prepare for waterproof installation – ACTi KCM-7111 User Manual
Page 13
Hardware Manual
Step 3: Prepare for Waterproof Installation
The camera comes with two (2) glands used for waterproof installation:
Cable Gland
: For use with an
Exterior-grade Ethernet cable
. Exterior-grade Ethernet
cables are already waterproof. See
Waterproof Solution with Naked Cable
on page 14.
Conduit Gland
: For use with a flexible conduit. This solution is recommended when an
exterior-grade Ethernet cable is not available or when other input/output devices or
external power adapter will be connected to the camera. See
on page
Determine the type of waterproof solution that is applicable to your installation requirements and
prepare the necessary accessories or purchase extra materials.
Cable Gland
Conduit Gland
For use with an
Exterior-grade Ethernet
cable
(not included in the package).
For use with a
3/8”
flexible conduit (not
included in the package).
For use with
1/2”
flexible conduit (not included
in the package)
NOTE:
The bundled conduit gland may vary.
Check the conduit gland that came with your
package to determine if 3/8” or 1/2" is the
suitable flexible conduit size.
or