Step 3: install the camera to the surface – ACTi B51 User Manual
Page 22
Hardware Manual
Step 3: Install the Camera to the Surface
1.
If necessary, insert a memory card, with the metallic contacts facing down, into the card slot
of the camera.
2.
Align the camera screw holes and the cable hole (if necessary) to the holes on the surface
and attach the three (3) supplied screws to secure the camera.
CAUTION:
When using electric screwdrivers,
be careful not to touch the camera
components while attaching the screws. Since electric screwdrivers vary in sizes, speed, and
force, they may bruise and damage the camera components.
DISCLAIMER:
ACTi will
not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.