ACTi Indoor Dome (D5xE5x) on Horizontal Pole with Pendant Mount - Manual (Page 3)

www.acti.com
Installation Guide
3
Installation Procedures
This guide describes procedures in installing the camera on a horizontal pole using the Pole
Mount with Pendant Mount and Mount Kit. For simplicity, most of the camera images used in the
succeeding sections were taken using the camera model with heat sink; same procedures apply
to the model without heat sink unless specified.
NOTE: The mounting accessories are not included in the camera package. Contact your sales
agents to purchase.
Prepare the following:

SMAX-0102 (Pole Mount with Pendant Mount and Mount Kit)
PMAX-0503
PMAX-0102
(Straight Tube without
Bracket)
PMAX-0110

Network Cable (not included)

Phillips Screwdriver (not included)