ACTi Indoor PTZ on Dropped Ceiling - Manual (Page 6)

www.acti.com
Installation Guide
6
5. Connect the network cable, power adaptor and any other cable connections (such as DI/DO,
audio in, etc.) to the camera.
NOTE:

The cables may be routed along the ceiling if the camera is installed on a hard ceiling.
Or, the cables may pass through a hole on the ceiling if the camera is installed on a
dropped ceiling.

For more information on connecting the terminal blocks for the power adaptor, Digital
Input / Output (DI/DO), or audio input, please refer to the camera model Hardware
Manual downloadable from the website ( www.acti.com ).
6. Remove the pre-cut tab on the cover ring using pliers.
7. Note that the cables will pass through the cut, align the metal plate hooks onto the holes of
the cover ring and then push to secure it in place.
Final installation would look similar to the picture below.