Step 1: attach the pole mount kit – ACTi Indoor PTZ on Vertical Pole with Accessory Sets of PMAX-0305 User Manual

Page 4

Installation Guide

Pole Mount with Heavy Duty and Mount

Kit Installation Procedures

Perform the following procedures to install the camera on a vertical pole using the Heavy Duty

Wall Mount and Mount Kit. The cables go along the pole then enter the Heavy Duty from the rear

side and through the Mount Kit and the camera.

Step 1: Attach the Pole Mount Kit

Using a screwdriver, turn the screw head of the wire strap counter-clockwise continuously

until the two ends are detached.

Insert the wire strap through the strap holes of the pole mount.

Do steps 1 and 2 to the other wire strap.