ACTi Outdoor Dome on Dropped Ceiling with Flush Mount - Manual (Page 10)

www.acti.com
Installation Guide
10
Step 5: Install the Camera
1. If necessary, insert a memory card (not supplied) into the card slot of the camera.
2. Align the screw holes and conduit hole of the camera to the mount.
3. Attach the three (3) screws (included in the flush mount package) to secure the camera to the
mount.
CAUTION: When using electric screwdrivers, be careful not to touch the internal
camera components while attaching the screws. Since electric screwdrivers vary in sizes,
speed, and force, they may bruise and damage the internal camera components.
DISCLAIMER: ACTi will not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.