Step 6: connect to network, Step 7: access the camera live view, Hardware manual – ACTi D51 User Manual
Page 18
Hardware Manual
Step 6: Connect to Network
Connect the other end of the network cable to a Power-over-Ethernet (PoE) switch or injector.
Then, connect the PoE switch or injector to a network or PC and a power source. See example
connection diagram below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
NOTE:
The use of UL Listed PoE switch / injector with the camera is recommended.
Step 7: Access the Camera Live View
on page 25 for more information on how to access the Live View
screen of the camera.