Physical description – ACTi E213 User Manual
Page 9
Hardware Manual
Physical Description
Item
Description
1
Serial Port
This port connects to serial devices via RS-485 or
RS-422 protocols. Use the supplied serial port
terminal block to connect the wires from the serial
device to the camera.
How to Connect a Serial Device
on page 18
for connection details.
2
Ethernet Port
Connects to a network using an Ethernet cable.
3
Memory Card Slot
Insert a memory card into this slot for local
on page 25 for more
information.
NOTE:
Supports microSDHC and microSDXC
cards.
4
Reset Button
Restores the factory default settings of the
camera. Resetting the camera must be done while
the power is on. Using a pointed object, such as a
paper clip, press and hold the
Reset Button
for at
least 5 seconds or until the Power LED goes off .
5
Power LED
The Power LED turns on when the camera is
powered on and the system is running.
6
Digital Input / Output
(DI/DO) and Audio
Input / Output
This connector connects to digital input or output
devices, such as an alarm trigger, panic button,
etc., as well as audio input and output devices,
such as microphones and speakers. Digital Input