Physical description – ACTi D71A User Manual
Page 10
Hardware Manual
Physical Description
NOTE:
The camera picture above is for reference only. Actual camera may slightly differ.
1) Ethernet Port
Connects to a network using an Ethernet cable.
2) Memory Card Slot
Insert a memory card (not included) into this slot for local recording purposes. See
Install / Remove the Memory Card
on page 37 for more information.
NOTE:
Supports microSDHC and microSDXC cards.
3) Reset Button
The purpose of the reset button is to restore the factory default settings of the camera,
including the administrator
’s password.
When to use the reset button?
1.
The administrator
’s password has been forgotten and therefore the camera cannot be
accessed.
2.
In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3.
In case of connectivity issues or abnormal video quality.
How to do the reset?
Press and hold the reset button for 5 seconds.