ZeeVee HDbridge Advanced - Manual (Page 12)

HDbridge™ Module Configuration Manual Page 12
www.zeevee.com Rev 1.0
Password Management
Since the HDbridge units can be accessed
over a network, changing the password
allows for added security.
User Name is always “admin” the
passwords can be set independently for
each module.
Resetting to defaults via WebManager or
the reset pin on the back of the unit will
change the password to “admin.”
Hit “Apply” to save your changes.
Status Tab
The Status tab provides general information
about the module.
The Navigation Menu on the left allows you
to select between “System” and
“Audio/Video” Status.
System Status
1. Firmware: Current and previous version
of firmware.
2. Temperature: Monitored in three
different locations inside each unit.
3. System and Process Uptime: Total
uptime for both the module and the
encoder processes.
4. Refresh: Information does not update
automatically. Use the “Refresh” link to
see updates to the data.



