Widex RC4-1 - Manual (Page 23)

23
A small bell appears in the display. If you want
to change the alarm setting, press [ (1) ]. Then
the bell disappears and you can change the
setting using the [ + ] [ – ] and [ (2) ] [ (3) ] keys. To re-activate
the alarm (the small bell), press the [ (1) ] key. If you want
the display to show the program/volume again, press the
[ (1) ] key and hold it down while pressing the [ (2) ] key.
When the alarm starts, the letters AL and the numbers
0:00 will be displayed alternately, and you will hear beeps
in your hearing aid. The beeps are repeated approximately
every ½ minute and the bell continues to blink until you
turn off the alarm.
To turn off the alarm, hold the [ (1) ] key down.