Widex P38 - Manual (Page 20)

20
Audio input
Senso can be furnished with an
audio shoe. This allows direct con-
nection to CROS/BiCROS systems
as well as assistive listening devic-
es such as FM equipment, hand-
held microphones, TVs, and cas-
sette players.
Connecting the audio shoe
Before connecting, the little cover
on the side of the hearing aid must
be replaced with the cover which
has one hole.
A Europlug is used for connection.
Insert the plug into the socket on
the base of the audio shoe. Please
note that the plug will only connect one way, as one of
the three pins is thicker than the other two.
Make sure that the M-MT-T switch is set to M (mi-
crophone).