Electrolux ELECTRIC DROP-IN COOKTOPS EW30EC55G B - Manual (Page 2)

Electric Drop-In Cooktops
EW30EC55G S, EW30EC55G W, EW30EC55G B
High standards of quality at Electrolux Major Appliances mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca
EW30EC55G 01/08 © 2008 Electrolux Major Appliances, NA Printed in the U.S.A.
6 1 / 2 " min.
25" min.
7 1 / 2 " min. to nearest
combustible wall
(either side of unit)
10"
12"
2" min. recommended
distance between rear
edge of cutout and
nearest combustible
surface above countertop
20 3 / 8 " min.
20 5 / 8 " max.
Approximate location
of junction box
29 3 / 4 " min.
30" max.
4" x 8" opening to
route armoured cable
30"
13"
max.
cabinet
depth
24"
2 1 /
2
" min. from
edge of cutout to front
edge of countertop
18"
min.
30" min.
for
unprotected
cabinet
24" min.
for
protected
surface
CL
30 3 /
4
" 21 1 / 2 "
28 5 / 8 " 19 1 /
4
" Overall depth
at center of
arc – 21
3 / 4 "
6 3 / 4 "
3 /
4
"
2 3 /
4
"
30" Electric Touch-Control Drop-In Cooktop Specifications
• Product Weight – 50 Lbs.
• Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC
only electrical supply with ground required on separate circuit fused on
both sides of line.
• Connected Load (kW Rating) @ 240 / 208 Volts = 8.4 / 6.3 kW
• Amps @ 240 / 208 Volts = 35.0 / 30.3 Amps
• Recommended Circuit Breaker – 40 Amps
• Always consult local and /or national electric codes.
• Allow 2" space below armoured cable opening to clear electrical cable
and allow space for installation of junction box on wall at back of cooktop.
• Overhead cabinetry should not exceed a 13" maximum depth.
• Allow 30" minimum clearance between top of cooktop and bottom of
unprotected wood or metal overhead cabinetry.
• Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum width
of appliance.
• Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MGS sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
• Allow 2" minimum clearance between rear edge of cutout and nearest
combustible surface above countertop.
• Allow 7-1/2" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
• It is recommended that drawers not be used beneath cooktop.
• To reduce risk of fire when using overhead cabinetry, install range hood
that projects horizontally a recommended minimum of 5" beyond bottom
of cabinets.
• Touch-Control Drop-In Cooktop model EW30EC55G is approved to
be used over any Electrolux Single Wall Oven.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.