Widex Flash-m - Manual (Page 42)

42
Method 2
2a. Pull the pointed end of the anchor through the
upper hole on the side of the tubing until the an-
chor is stopped by the grip at the end.
2b. Loop the anchor in the direction indicated by the
dotted line and arrows.
2c. Guide the anchor through the lower hole on the
side of the tubing as illustrated to form a loop.
2d. When the loop is the correct size, turn the ear-set
around and cut off any excess with scissors or sim-
ilar.
2a 2b
2c 2d