Starting warm engine, Stopping engine, Starting warm engine stopping engine – Echo SRM-225U User Manual

Page 24: Operation srm-225u starting warm engine

X7722271407

OPERATION

SRM-225U

Starting Warm Engine

The starting procedure is the same as Cold Start except DO
NOT close the choke, and do not hold throttle trigger fully
depressed.

The attachment should not move at idle, otherwise serious
personal injury may result.

Note: If attachment moves, readjust carburetor according to

“Carburetor Adjustment” instructions in this manual or
see your ECHO Dealer.

1. Stop Switch

Move stop switch button (A) forward away from the STOP
position.

2. Purge Bulb

Pump purge bulb (C) until fuel is visible in the “Clear” fuel
return line.

Note: Lightly place knee on drive shaft to stabilize unit during

starting. Do not apply excessive downward force or
damage to unit can occur.

3. Recoil Starter

Lay the unit on a flat area and keep movable attachment parts
clear of all obstacles. Rapidly pull the recoil starter handle (D)
until the engine fires.

Note: If engine does not start after 5 pulls, use Cold Start

Procedure.

Stopping Engine

1. Throttle

Release throttle and allow engine to return to idle before
shutting off engine.

2. Stop Switch

Move stop switch button (A) backward to STOP position.

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall
engine. Have your ECHO dealer repair stop switch before using trimmer again.