Westermo SD-300 - Manual (Page 11)

11 6642-2201 11
Individual Auto Negotiation disable
Disable or enable auto-negotiation
Enable will override any S2 settings
S1
A-N enabled for all TX-ports.
Factory default.
Individual Port Speed
10 Mbit/s or 100 Mbit/s
ON
1 2 3 4 5 6 7 8
S2
100 Mbit/s set for every
TX-port.
Factory default.
ON
1 2 3 4 5 6 7 8
S2
TX-port 1x and 2x set to
10 Mbit/s, port 3x set to
100 Mbit/s. Requires A-N
disabled.
Individual Port Duplex*
Half or full
ON
1 2 3 4 5 6 7 8
S2
Full duplex set for every
TX-port.
Factory default.
ON
1 2 3 4 5 6 7 8
S2
TX-port 1x and 3x set to
half duplex, port 2x set to
full duplex. Requires A-N
disabled.
S2:1–8 S1:1–4
ON
1 2 3 4
S1
A-N disabled for TX-port 1x
and 3x. Setting of S2 will be
valid for port 1x and 3x.
ON
1 2 3 4
The DIP-switch settings are ignored for FX ports.
* If the connected device does not support A-N, the DIP switch selection will be used.
E.g. manually select Half Duplex when an Westermo ED-10/11/12/20 is connected.