Encore electronic ENMGS-24+4 - Manual (Page 10)

Installing Network Cables
1. Crossover or straight-through cable: All the ports on the switch
support Auto-MDI/MDI-X functionality. Both straight-through or
crossover cables can be used as the media to connect the switch with
PCs as well as other devices like switches, hubs or router.
2. Category 3,4,5 or 5eUTP/STP cable: To make a valid connection and
obtain the optimal performance. An appropriate cable that corresponds
to different transmitting/receiving speed is required. To choose a
suitable cable, please refer to the following table.
Media Speed Wiring
10Mbps Category 3,4,5 Utp/STP
100Mbps Category 5 UTP/STP
10/100/1000Mbps
copper
1000Mbps Category 5,5e UTP/STP
1000Mbps Fiber
(Mini GBIC required) 1000Mbps The cable type differs from the
mini-GBIC you choose. Please refer to
the instruction came with your
mini-GBIC.
9