Access to supervision user manual – Eaton Electrical -66103 User Manual
Page 7
34003906EN/AE - 7
To check whether the
Network Management Card & Modbus/Jbus (66103) is operational after
installation and configuration, proceed as follows.
●
Run a browser
●
Enter in the address bar:
http://IP address/ (e.g. http://172.16.1.82/)
●
The home page is displayed
●
Set the time by clicking the Time command.
●
Continue configuration via the sections in the Settings menu.
This manual provides all the information required to install and configure the Network Management
Card & Modbus/Jbus (66103).
For more information on the supervision, control and configuration functions offered by the Network
Management Card & Modbus/Jbus (66103), see the user manual on the Solution-Pac 2 CD-ROM or
in the Products/Power Management section of the
www.eaton.com/powerquality site.
ACCESS TO SUPERVISION
USER MANUAL
34003906EN_AE.fm Page 7 Vendredi, 19. décembre 2008 1:49 13