Electrolux EOD 984 - Manual (Page 37)

37
We strongly recommend that you carry out the
following checks on your appliance before calling a
Service Engineer. It may be that the problem is a
simple one which you can solve yourself without the
expense of a Service call.
If our Service Engineer finds that the problem is listed
below you will be charged for the call whether or not
the appliance is under guarantee.
The grill, oven and timer do not work:
* Check that the appliance has been wired in
and is switched on at the wall.
* Check that the main appliance fuse is
working.
* Check that the timer is set to manual (see
page 31).
If you have checked the above:
* Switch OFF appliance at the wall and allow
the appliance to cool for a couple of hours.
* Switch ON again. The appliance should now
be working normally.
The grill works but the oven does not:
* Check that the timer is set to manual
operation (see page 31).
* Check that the grill control is in the OFF
position.
* If you have checked that the timer is set for
manual switch OFF at the wall to allow the
oven to cool. After a couple of hours the
oven should be working normally.
The top oven and grill work but the main oven
does not.
* Check that the timer is set to manual
operation (see page 31).
* For top oven check that the grill control is in
the OFF position.
* If you have checked the timer is set to
manual switch OFF at the wall to allow the
oven to cool. Check that the oven is now
working normally.
The timer control does not work
* Check that the operating instructions are
being closely followed (See page 31).
The grill does not work or cuts out after being
used for a long period of time.
* Leave the oven to cool for a couple of hours.
Check that the grill operates normally.
Ensure that the door is left open during
grilling.
* If the cooling fan fails, the grill will not
operate correctly. Please call your local
Service Force Centre.
The oven temperature is too high or too low:
* Check that the recommended temperatures
are being used (see page 19 and 27). Be
prepared to adjust the temperature up or
down by 10°C to achieve the results you
want.
* Care should be taken if using an oven
thermometer to check oven temperatures as
they may be inaccurate.
The following factors should be considered.
* Ensure you purchase an accurate good
quality instrument.
* Ovens will cycle about a set temperature and
will not be constant.
If the oven is not cooking evenly.
* Check that the appliance is correctly installed
and that it is level.
* Check that the recommended temperatures
and shelf positions are being used.
The oven light fails to illuminate:
* Refer to page 36 'Replacing the Oven Light
Bulb'.
The oven fan is noisy:
* Check that the oven is level.
* Check that bakeware and shelves are not
vibrating in contact with the back panel in the
oven.
The indicator neons are not working correctly or
the function selected is not working.
* Check that you have correctly selected only the
oven function you require. Ensure all the other
controls are in the OFF ‘O’ position.
NB. If the selector is set to ‘O’ and the oven
temperature control to a setting the main oven
neon will illuminate and the cooling fan will
operate. This is not a fault.
SOMETHING NOT WORKING?