Westermo TD-29 - Manual (Page 9)

9 6611-2002
Configuration
DIP switch settings
DIP-switches are accessable under the lid on top of the unit. DIP-switches are used to
configure the modem.
Warning!
Prevent damage to internal electronics from electrostatic discharges (ESD)
by discharging your body to a grounding point (e.g. use of wrist strap),
before the lid on top of the modem is removed.
Warning! Do not open connected equipment.
Prevent access to hazardous voltages by disconnecting the unit from
DC power supply and all other electrical connections.
NOTE
When configuring via DIP-switches, the settings of DIP-switches configure the unit only
after a power reset. A setting configured by any other method during normal
operation, overrides the DIP-switch setting. However, at power up, the DIP-switch
settings have precedence over the setting configured by any other method.
S2:1–4 S1:1–8
1
2
3
4
5
6
7
8
9
!
!