Westermo Lynx Series - Manual (Page 13)

13 6640-3202
Parameter Options Description
Port Number N/A Port number correspond to the port
number on the actual switch
Link Status LINK Indicates Link status
Current Config Disabled
Auto
10M HDX
10M FDX
100M HDX
100M FDX
1000M FDX
(Port 7-8 only) Current port settings
New Config Configuration of new setting
Disabled Port disabled
Auto Port automatically set to same
capacity as receiver
10M HDX 10 Mbit half duplex
10M FDX 10 Mbit full duplex
100M HDX 100 Mbit half duplex
100M FDX 100 Mbit full duplex
1000M FDX (Port 7-8 only) 1 Gbit full duplex (Port 7-8 only)
Special Mode None Normal mode
Mirror A port set to mirror mode will
receive data from ports set to sniff
mode.
Sniff Data sent on a port set to sniff mode
can be received from ports set to
mirror mode.
Ingress Limit 1) 0-8192 Bandwidth limit into the port
Egress Limit 0-8192 Bandwidth limit out of the port
Port Alarm ActivatedNot Activated Port alarm activatedPort alarm deac-
tivated
Note 1. Works only for UDP packets, not TCP/IP