Welltech WellRec 5600 V.1.0 User Manual

Page 9

Welltech Computer Co., Ltd.

Step 1:

After successfully logon to the system, we need to change the

Network configuration. Click Control > Network to setup the Service
Interface parameters as figure 2.2-1.

Figure 2.2-1

Step 2:

Enter the deserved IP address, Submask and default gateway or

selected to “Use DHCP”. Apply the change by clicking Apply button as
figure 2.2-2.

Figure 2.2-2

Step 3:

When screen shows “Change network configuration may cause

server disconnected, are you sure?”

click on OK button to changes

IP address as figure 2.2-3.

Figure 2.2-3

Step 4:

When screen shows “After configuration changed, please re-login

system with new IP address and execute Soft-Reset!”

click OK

WellRec 5600

- 9 -