Watson-Marlow 701 - Manual (Page 12)

13 Pump specification
14 701RB Pumphead: key safety information

Ensure that the pump is isolated from mains voltage.

Ensure that there is no pressure in the pipeline.

If a tube failure has occurred, ensure that any product in the pumphead has been
allowed to drain from the pumphead to a suitable drain.

Ensure that protective clothing and eye protection is worn if hazardous products are
being pumped.
15 701R Safe-guarding
Primary safety on 701R electrical and air powered baseplate pumps is provided by the tool-
lockable pumphead guard.
Guard switch
The pumphead has been fitted with two guard switches. When the track is removed, the
pump stops. The pump can be restarted only if the track is returned to its correct position.
Control range See pump specification label
Voltage/frequency See pump specification label
Power consumption See pump specification label
Operating temperature range 5°C to 40°C
Storage temperature range -40°C to 70°C
Noise <85dBA at 1m
Standards EN60529 (IP55)
Machinery Directive: 2006/42/EC
EMC Directive: 2004/108/EC
Before opening the pumphead guard please ensure that these
safety directions are followed.
Page 12 of 25 Watson-Marlow Bredel E-Manuals
14/12/2009 file://M:\staging\pdfs-global\m-701baseplate-gb-02.htm