Test operation – Venstar T0140 User Manual

Page 18

Text mode
Original mode

Page 18

Test Operation

On the thermostat, slide the Mode Switch
to COOL. Press the COOLER or WARMER
button until the set temperature is 10
degrees below room temperature. The
HVAC unit should energize in the cooling
mode (Page 6).

Note: You may need to wait

up to five minutes for cooling to energize due
to the compressor lockout feature.

On the thermostat, slide the Mode Switch to

OFF. Slide the Fan Switch to Fan On. The
fan should turn on and run continuously
(Page 6).

OWNER'S MANUAL

T0140

HEAT