TW Steel Grandeur Tech User Manual
Page 3

USE OF THE CROWN
To adjust the time or set the date you first have to
unscrew the crown anti-clockwise. Pull the crown out
to the 1st or 2nd position. After adjusting, screw
the crown clockwise back on the case.
ADJUSTING THE TIME
Pull the crown out to the 2nd click position so that the
second hand stops at (0) position. Turn the crown to set the
hour and minute hands.
ADJUSTING THE DATE
Pull the crown out out to the 1st position.
Turn the crown anti-clockwise to set the date. After the date
has been set, push the crown back to the normal position.
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time in
1/20 second united up to a maximum of 59 min and 59 sec.
The retrograde chronograph 1/20 second hand keeps running
continuously for 30 seconds after starting and then stops at (0)
position. Press button B to change the watch to the chronograph
mode. The second hand stops at the (0) position and changes to the
chronograph 1/20 second hand. The chronograph can be started and
stopped each time button A is pressed. Pressing button B resets the
chronograph.All hands return to their (0) position. If the chronograph
second hand and the chronograph 1/20 second hand do not return to
the (0) second position after the chronograph has been reset or after
replacing the battery, you should do the following: Pull the crown out
to the 2nd position. Press button A to set the chronograph second
hand to the (0) position. Press button B to set the chronograph 1/20
60
65
70
75
8
0
3
0
0
2
4
0
8
5
90
100
110
120
130
140
15
01
60
18
0
200
Hour hand
Chronograph minute
hand
Chronograph second
hand
Second hand
Date
(0) position
Button A
Minute hand
24-hour hand
Crown / normal crown
position
Button B
second hand to (0) position. The chronograph hands can
be advanced rapidly by continuously pressing button A or B. Once
the hands have returned to the (0) position, return the crown to its
normal position an screw the crown clockwise back on to the case.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!