TS Performance 8210101 - Manual (Page 8)

Installation: Plug&Play
Fueling Actuator Connections:
1. Locate the fueling actuators on the drivers side of the
engine. Refer to pages 3 and 4 for a location pictures to
find these actuators.
2. The front and back actuators are where the signals will be
intercepted. Disconnect the two pin connectors from the
actuators illustrated in the following pictures.
7
Installation: Plug&Play
8
3. The connection is Plug & Play. Just disconnect the two pin
connectors, plug our connectors into the actuators, then plug
the factory harness to our harness.