TS Performance 1110302 - Manual (Page 2)

Continued
Installation of the TS Performance Power Play Mp-8
Dodge 24 Valve 03-06
Read all instructions and fully understand them before installing you TS Performance MP-8 module.
Disconnect the battery terminals and remove keys from ignition before installation.
Place Di-Electric Grease onto every electrical connection.
1. Find a proper location for mounting the
module. We recommend the Fuse and Relay
Center on the driver’s side of the engine
compartment in front of the battery. Use the
supplied Velcro to fasten the module to the
fuse box.
2. Locate the MAP Sensor just beside the Valve
cover on the driver’s side of the engine. It
has a blue weather tight seal. Disconnect the
plug and connect ours in-line with the
supplied connectors.
3. Locate the Fuel Pressure Sensor just in front
of the MAP Sensor. Disconnect the plug and
connect our supplied connectors in-line.
4. Route the adjustable switch wire through the
firewall to the MP-8 module.
5. Mount the switch on the dash in re-attach of
the driver.
6. Re-connect the battery terminals.
If there are any questions on the product or
installation of the module give us a call at TS
Performance (270) 746-9999