TS Performance 4110804 - Manual (Page 2)

Continued
Instructions for installation
1. Disconnect batteries
2. Locate the intake manifold on the same side of the engine as the oil filter.
3. Unplug the factory MAP sensor on the air intake manifold.
4. Plug Agri-Power male connector into factory MAP sensor
5. Plug the factory wiring harness into the Agri-Power female connector.
6. Use the provided zip ties to attach your Agri-Power Module to a secure location inside the engine
bay (avoid engine exhaust).
2. 3.
DO NOT unplug the Agri_Power Module while the engine is running. This may
result in engine or component failure and may void warranty on the engine or Agri-
Power unit.
If you have any questions contact TS Performance @ 270-746-9999