TS Performance 4110101 - Manual (Page 2)

Continued
Installation of the TS Performance John Deere Agri-
Power module.
Read all instructions and fully understand them before installing you TS Performance John Deere
Agri-power module. Disconnect the battery terminals and remove keys from ignition before
installation.
Place Di-Electric Grease onto every electrical connection.
1. Find a proper location for mounting the module. We recommend a good dry area away from heat.
There should be enough length in the harness to mount in a good safe position.
2. Locate the 6-pin connector near the pump labeled from A to F.
3. Disconnect the 6-pin connector and plug our connector in. Plug the stock connector to pigtail
connector on the harness
4. Install the 3 position switch in a good accessible area away from heat or moisture. As you turn the
switch clockwise you will increase HP and Torque. The settings are 1) 10%, 2) 20%, 3) 30%.
If there are any questions on the product or installation of the module give us a call at TS Performance
(270) 746-9999