beautypg.com

Set up, Filling – Duracraft Baby's Breath Vaporizer DH-711 User Manual

Page 4

background image

SET UP

NOTE: We recommend that the humidifier be disinfected prior to first use.

Please see CLEANING instructions.

• Select a firm, level, flat location — at least six inches (15 cm) from any wall

for proper air flow and convenient to an electrical outlet (Fig. 1).

Place vaporizer where it is out of the reach of children. Make sure cord is

not in an area where it can be tripped over or pulled on. Be sure that the

steam outlet is pointed away from any person.

• Place the vaporizer on a water-resistant surface, as water can damage

furniture and some flooring. Duracraft

®

will not accept responsibility for

property damage caused by water spillage.

Fig. 2

1. To remove the Steam Assembly, hold the Base and turn the Steam Assembly

counter-clockwise then pull up.

2. Fill the Base with COOL tap water to the indent marked “Full Level” located on

the back of the unit (Fig. 2). DO NOT USE HOT WATER. Doing so may

damage the vaporizer.

3. Replace the Steam Assembly back onto the Base. Turn it clockwise

to lock in place. Once the Steam Assembly has been positioned, do not

attempt to move vaporizer. If it has to be moved, unplug it and empty the

Base first.

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN

ELECTRIC SHOCK COULD OCCUR.

4. Plug the filled vaporizer into a polarized 120V outlet. DO NOT FORCE THE

POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

FILLING

Fig. 1

Full Level

Indent

WALL

6" minimum