Tri Tool 208B Elbow Mandrel - Manual (Page 9)

9
Model 208B EM (Elbow Mandrel)
92-1496 : Orig. 100920
SETUP AND OPERATION
The information contained in this manual should be used in conjunction with
'Operator's Manual' 92-1482.
Always read the operating instructions carefully/completely before attempting to
operate the Model 208B EM.
When operating any/all Tri Tool Inc. equipment follow the 'Note' statements through
the manual for equipment safety and the ‘Warning’ and/or ‘Caution’ notes for opera-
tor safety.
If the mandrel is operated in such a way that the mandrel collects chips and/or
debris near the head, the head should be cleaned after each cutting operation.
SETUP
The mandrel should be setup in the elbow so that one pin contacts the top radius of
the pipe ID.
This will help center the mandrel.
Contact Pin Setup
Contact Pin at the top radius of the pipe.