Tri Tool 204B Elbow Mandrel - Manual (Page 7)

7
Model 204B-EM Elbow Mandrels
92-0697 : Rev. 970131
MAINTENANCE
IN GENERAL
All components should be cleaned and coated with a light film of oil prior to storage.
If the mandrel is operated in such a way that the mandrel collects chips or debris near
the head, the head should be cleaned after each cutting operation.
DAILY MAINTENANCE
Wipe the unit down and spray with a rust preventative under severe humidity conditions.
Visually inspect for loose screws, missing bolts, or damage due to impact.
Contact TRI TOOL Inc. if major repair is required.
Tighten or replace screws or other parts as required.