Tri Tool 200B Series EM Adjustable Center Pin Kit v.2 - Manual (Page 7)

7
Model 204B, 208B and 214B EM Adjustable Pin Kits
92-1498 : Orig. 100920
SETUP AND OPERATION
Always read the operating instructions carefully/completely before attempting to
operate the Model 200 Series BEVELMASTER
® .
SETUP
Remove the standard pin from the center head position and replace it with the
correct adjustable pin for the job.
The two (2) bottom standard pins will stay the same.
Pin Locations to Centerline
Adjustable Pin
Standard Pin
Standard Pin
With the adjustable pin, the mandrel assemblies centerline can be adjusted
up to .100" (2.5 mm).
Centerline Adjustment
Centerline
.100" (2.5 mm)