Tissot 110 - Manual (Page 5)

Activation of the glass
Using pushers and ,
bring the 2 hands precisely to
12 o'clock
Incrementation of the minute
hand (3 steps = 1 minute)
Incrementation of the hour
hand (3 steps = 1 minute)
Validation of the setting
Selecting the "Units" mode
(1) Procedure allowing the digital display to be synchronised
with the hands.
Note: it is not necessary to perform this synchronisation
operation when the digital display and the hands show
the same time.
110_F/06.03 5/15 www.tissot.ch
Display mode
Activation of the crystal
Selecting the display mode
Return to h-m-s mode
(1) The "h-m-s" and "date" modes remain active.
(2) The "units" mode is a temporary setting mode.
(3) This procedure is valid when the crystal
is activated for the ALTIMETER, CHRONO,
COMPASS, ALARM, THERMO and METEO functions.
(3)
h-m-s
date
units
(1)
(2)
1"
h-m-s / date / units