D-Link DVS-301 - Manual (Page 70)

Building Networks for People
DVS-301 User Manual v1.00
64
Advanced functions
Web
Viewing system log
Click the button on the configuration page to view the system log file. The content of the file
reveals useful information about configuration and connection after the system boots up.
Viewing system parameters
Click the button on the configuration page to quickly view the whole system parameter set. The
content is the same as CONFIG.INI.
Restore factory default settings
Click the button on the configuration page to restore the factory default settings. This means
any changes made before will be lost and the system will be reset to the initial status when
shipped from the factory. After confirmation, the system will restart and require the installer
program to setup the network.
Clear data path for proprietary commands
Video Server provides a highly customized control support to third-party serial interface devices
aside from PTZ cameras. That means in addition to setting up a custom camera with PTZF
commands, users may utilize this mode and introduce a customized homepage to transmit
arbitrary user-defined commands from the user-side to Video Server. The third-party device
connected to the serial port of Video Server will receive the same command sent by the
originator. The user only needs to attach the command in ASCII format after the special URL.
Video Server will parse the command and transfer into binary code to send out. See the clear
data mode serial port driver in the URL commands of Video Server section for detailed
description.