Basic operation with rmc-80 – Datavideo MP-4100 User Manual
Page 23
22
Basic Operation with RMC-80
Recording
MP-4100 supports Instant Recording, Alarm/Event Recording and Video Loss Recording.
You may always use the
key on RMC-80 to start or end an instant recording.
Whenever an event is detected, system will start the event recording. Following status icons
and message bars will be displayed on the top of screen, when a recording starts.
During recording, pressing
key on the RMC-80 will instant play back video with jumping
back 20 seconds pre-recording video. You can press it more than once to go back farther.
Recording will continue in the background without any interruption, the recording date and
time will be also displayed on the screen, this is the MP-4100 triplex feature which means
you won’t miss a moment.
Play Back
Press
key, you may access event list at any time. All events recordings are ordered by
time. Use the
or
key to highlight an event and press the
key to play back
this event.
RECORD
STOP
PLAY
UP
DOWN