Teac KS-T2000 - Manual (Page 18)

Kamesan KS-T2000
18
The gain level for all types of microphone ranges from –30 to –
70 dBs (marked in white; the –40 and –50 points are marked for
convenience), and the gain level for line-level sources ranges from
–20 to +4 dBm (marked in blue).
The head and mixer amps of the Kamesan KS-T2000 allow con-
siderable leeway. On the input stage, there is about 28 dB avail-
able, and on the output stage, about 17 dB is available
To help you match the levels of the Kamesan KS-T2000 with the
recorder connected to the outputs, the mixer is fitted with an in-
tegral 1 kHz line-up oscillator.
In order to see the output level using the oscillator:
1. Make sure that both the OUTPUT level switches are set to the
correct value (usually +4).
2. Turn the power on (up), and then turn the oscillator switch
on (up).
3. To monitor both channels together, set the monitoring selec-
tion switch to the L/R setting (see “Monitoring” on page 16
for an explanation of the monitoring switch settings).
4. Adjust the level of the outputs so that the VU meter reads
0 dB.
5. Remember to turn the oscillator off when the adjustment
has been made.
Setting and monitoring the
output level