Dual MXD25 - Manual (Page 6)

6
General Operation
Insert the USB connector of a battery powered USB device
into the USB charging port on the front panel, which
provides 5 volts DC and 1.0 amps. The USB device will
immediately begin charging.
Note: The USB charging port may not be compatible with
every device due to differences in power requirements.
Note: This USB port provides power only, and will not
playback music from a USB device.
Press AUDIO to select between Volume (default), Bass,
Treble, Balance & Fader.
Press AUDIO until BA appears
Rotate the rotary encoder left/right to adjust
(-6 minimum / 6 maximum)
Press AUDIO until TR appears
Rotate the rotary encoder left/right to adjust
(-6 minimum / 6 maximum)
Press AUDIO until B appears
Rotate the rotary encoder left/right to adjust
(BL 15/BR 15) B 00 represents equal balance.
Press AUDIO until F appears
Rotate the rotary encoder left/right to adjust
(FF 15/FR 15) F 00 represents equal balance.
USB Charging Port
Select Audio
Bass
Treble
Balance
Fader
BASS VOLUME TREBLE BALANCE FADER
MXD25 OPERATION