beautypg.com

Ext sync playback, Timer playback, Repeat playback – Teac CD-RW901MKII User Manual

Page 21: 4 − playback operations

background image

TASCAM CD-RW901MKII

21

4 − Playback operations

Timer playback

By using an external timer, you can set the CD-RW901MKII

to play the loaded disc automatically when the unit is turned

on by the timer.

1. First, plug the power cord of the CD-RW901MKII

into the power outlet of the timer.

2. Load a disc into the unit.
3. Switch the

TIMER

switch on PLAY to enable timer

function on for the desired deck.

When Timer playback has been turned on, the

timer icon lights up in the display.

NOTE

The indicator flashes when a disc is not loaded into
the unit.

4. Set the timer to the desired time. Consult the

timer’s operation manual for details. At the set

time, the power to the CD-RW901MKII will be

turned on, and playback will automatically begin.

Timer indicator

Repeat playback

1. Press the

REPEAT

key to turn on the repeat mode.

In this mode, all the tracks on the disc are played

continuously. The display shows

Repeat ON

and the

indicator lights up

REPEAT

.

During playback, if the repeat mode is turned on,

playback continues as before, and when the last track

finishes, playback resumes from the first track.

If the repeat mode is turned on when the deck is

stopped, press the

PLAY

key to begin operation.

2. Press the

REPEAT

key again to turn off repeat

mode.

Repeat OFF

appears then the

REPEAT

indicator

turns off.

NOTE

Combining the repeat mode with the program,
Single-track playback and Random playback functions
will enable Program repeat, Single-track repeat and
Random repeat operations, respectively.

Settings for the repeat playback mode remain after
power is turned off, except the specified A-B section
(see “A to B repeat playback” on page 22).

EXT SYNC playback

In this mode, the unit will play back in synchronization

with the clock selected as digital input source (OPTICAL,

COAXIAL, AES/EBU).
When stopped, use the EXT SYNC option in the PLAY

sub-menu (see “Operation basics” on page 16) to set the

external synch playback mode on.
Select the input source for sync playback.

NOTE

When the EXT SYNC is on, and when the unit detects
a signal other than 44.1kHz, synchronization with the
clock of the selected digital input source may fail, and
EXT CLK Err! will be displayed. The audio playback may also
be affected.

If the selected digital input source is at 48kHz, using the 48k

Fs adjustment function allows the audio to be played back at

the correct pitch.

When stopped, and when in playback or playback ready
mode, press the

SYNC REC key to turn the 48k Fs

adjustment function on or off. When the function is on,

48k

Fs Adj

will be displayed.

The setting remains until the EXT SYNC function is set to off,

and even the power is turned off.

NOTE

When the 48k Fs Adjustment is on, and when the unit
detects a signal other than 48kHz, synchronization
with the clock of the selected digital input source may
fail. The audio playback may also be affected.

When the 48k Fs adjustment is on, the Pitch control
and Key control functions cannot be used.

The EXT SYNC playback function does not operate
with MP3 discs.

This manual is related to the following products: