Teac CD-RW900MKII - Manual (Page 14)

14
TASCAM CD-RW900MKII
2 − Features of the CD-RW900MKII
RC-RW900 Remote control unit
1 DISPLAY key Press this key to see the current disc
title when the disc is stopped, or the current track title
while in playback or ready mode.
When entering TEXT data, using this key switches the
text characters.
2 TIME key Press this key to cycle through the time
display modes.
3 Number keys (0 through 9) Use these keys for direct
entry of track numbers when playing back, or making a
programmed play list.
4 REPEAT key Changes between the various repeat
modes when playing back (see “Repeat playback” on
page 20).
5 A-B key Sets the A to B repeat points and playback
mode (see “A to B repeat playback” on page 21).
6 DIRECTORY key Use this key to switch MP3 file
directory playback on and off.
7 PITCH key Switches pitch control on and off.
8 FADER key Use this key to start fade-in recordings
or to start a fade-out when recording (see “Fade-in and
fade-out recording” on page 25 for details).
9 RECORD key Use this key to enter record ready mode.
0 SYNC REC key Use this key to turn synchronized
recording on and off (see “Synchronized recording” on
page 26 for details).
q SEARCH keys ( ∆/˚ ) Use these keys to move the
playback position inside a track.
w STOP key Use this key to stop playback or recording.
e PAUSE key Use this key to standby for playback
or recording.
r OPEN/CLOSE key Opens and close the disc tray.
t CLEAR key Clears a mistaken entry made with the
number keys.
In the program mode, pressing this key cancels the
program entered at the last.
It also acts like the ESCAPE key in the Menu mode.
y ENTER key Pressing this key is equivalent to pressing
the MULTI JOG dial to confirm an entry.
u MENU key Switches the menu mode on or off.
i PLAY MODE key Use this key to choose between the
different playback modes (single play, continue play, etc.).
o ERASE key Erases tracks (CD-RW discs only), or a
whole disc, or to refresh a “bad” disc, or to unfinalize a
finalized disc (see “Erasing” on page 29 for details).
p FINALIZE key Finalizes recordable discs. See
“Finalizing” on page 28 for details.
a REC MUTE key Use this key when recording, to mute
the input signal for about four seconds and then to enter
record ready mode (see “Rec mute function” on page 27).
s SKIP ( Â /¯ ) keys Use these keys to move
between tracks when playing back (equivalent to rotat-
ing the MULTI JOG dial).
d PLAY key Use this key to start playback, or enter
record mode from record ready mode.