Teac CD-2000 - Manual (Page 7)

< Do not play irregular shape CDs (octagonal, heart shaped, business
card size, etc.). They can damage the unit.
< If you are in any doubt as to the care and handling of a CD-R/
CD-RW disc, read the precautions supplied with the disc, or contact
the disc manufacturer directly.
< Should the disc become dirty, wipe the surface radially (from the
center hole outward towards the outer edge) with a soft and dry
cloth.
< Never use such chemicals as record sprays, antistatic sprays or
fluid, alcohol or thinner to clean the discs. Such chemicals will do
irreparable damage to the disc’s plastic surface.
< Discs should be returned to their cases after use to avoid dust and
scratches that could cause the laser pickup to ”skip”.
< Do not expose discs to direct sunlight or high humidity and
temperature for extended periods. Long exposure to high
temperatures will warp the disc.
< Do not play any disc that is warped, deformed or damaged. Playing
such discs may cause irreparable harm to the playing mechanisms.
< CD-R and CD-RW discs are more sensitive to the effects of heat and
ultraviolet rays than commercial CDs. It is important that they are
not stored in a location where they are exposed to direct sunlight,
and which is away from sources of heat such as radiators or heat-
generating electrical devices.
< While printable CD-R and CD-RW discs utilizing modern printing
technologies are generally acceptable, older systems that use
adhesives to attach paper type labels to the disc surface are not
recommended.
< Do not stick papers or protective sheets on the discs and do not
use any protective coating spray.
< Use a soft oil-based felt-tipped pen to write the information on the
label side. Never use a ball-point or hard-tipped pen, as this may
cause damage to the recorded side.
< Never use a stabilizer. Using commercially available CD stabilizers
with this unit will damage the mechanisms and cause them to
malfunction.
7
ENGLISH