Teac CD-P1260 - Manual (Page 14)

14
Up to 64 tracks can be programmed in the desired order.
Shuffle function doesn’t work during programmed playback.
Press the PROGRAM button in the stop mode. 1
The MEMORY indicator appears on the display.
< To cancel the program mode, press the Stop button (H).
Press the numeric buttons (or press the Skip button
(.//) repeatedly) to select a folder on a MP3 disc,
then press the PROGRAM button. 2
The track is programmed, and “P-02” is displayed.
< Repeat steps and to program more tracks.
< You can program up to 64 tracks.
3 2
< When the playback of all the programmed tracks has finished,
or if the STOP button is pressed, the MEMORY indicator will
go off and the program mode will be cancelled.
The program is retained in memory until the OPEN/CLOSE
button or the POWER switch is pressed. You can return to the
programmed playback by pressing the PROGRAM button and
the PLAY/PAUSE button (G/J).
CD
MP3
Programmed Playback
Press the numeric buttons (or press the Skip button
(.or/) repeatedly) to select a track, then press the
PROGRAM button. 3
< MP3 tracks recorded out of folders are in the “01” (ROOT)
folder.
< Skip this step when playing a CD.
When the selection of track numbers is completed,
press the Play/Pause button (G/J) to start programme
playback. 4